bushhog

January 20, 2021

Energy UNITS FOR LIFT TABLE 1
Basic Description
This energy unit is intended exclusively to the smaller lift table,Consisting of large strain gear pump, AC motor, multi-functional manifold, valves, tank, etc. This energy unit is broadly made use of inside the business of logistic products which include minifork lift, scissors lift and ariel functioning platforms. The lower-ing motion is controlled by the solenoid valve together with the pace controlled from the adjustable needle valve.
Energy UNITS FOR LIFT TABLE two
Common Description
This energy unit is made solely for your medium lift table, Consisting of very effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The reducing movement is actived from the solenoid valve as well as the velocity controlled through the adjustable needle valve. Once the lift rises to a large positoin, but the electrical power provide is reduce, the decreasing motion is managed from the manual override function.
Electrical power UNITS FOR LIFT TABLE three
General Description
This electrical power unit is designed solely for the massive lift table, Consisting of remarkably effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing motion is actived from the solenoid valve plus the velocity controlled by a strain compensated flow control valve.
Power UNITS FOR LIFT TABLE 4
Basic Description
This energy unit is designed exclusively for the substantial lift table, Consisting of extremely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing movement is actived through the solenoid valve as well as speed controlled by the adjustable needle valve. Once the lift rises to a substantial positoin, but the electrical power provide is minimize, the reducing movement is managed by the guide override function.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, which might only work intermittently and repeatedly, i.e. one minute on and 9 minutes off.
2. Clean the many hydraulic parts concerned ahead of installation of the electrical power unit.
three. Viscosity of your oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities.N46 hydraulic oil is proposed.
four. Oil altering is needed following the first a hundred operation hours,afterwards after each and every 3000 hrs.
5. The electrical power unit proven is intended to be mounted vertically.