bushhog

February 2, 2021

FMM Style Mill Couplings
The FMM Type coupling includes one particular conventional flex hub, one universal straight bored hub as regular, two sleeves and 1 accessory kit. This coupling is supplied with exposed bolts as common. Shrouded bolts can be found on request by means of size 5.five.
Features
For long lifestyle
Normal 20° pressure angle
Heat treated bolts for better power
Corrosion resistant bolts and nuts for ease of upkeep
Supplies parallel, angular misalignment and finish float
Flex Half coupling interchangeable with business specifications
Lengthy Universal Hub provided to customer specs with straight or tapered bores
Ordering Information
Application: Driver and Driven.
Kind and size of coupling, horizontal, vertical and so on.
Power: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance amongst shaft ends (BSE).
Shaft sizes.
Taper per foot and length of taper if tapered bore is needed.
Specify counterbore dimensions if wanted.
Submit a drawing if readily available.

FHDFS Type Floating Shaft Couplings
The FHDFS Sort coupling includes two flex-rigid couplings and a single floating shaft. The coupling is provided with the rigid hubs outboard unless otherwise specified. The coupling includes exposed bolts only.
Capabilities
Flex Hubs for lengthy lifestyle
Conventional 20° pressure angle
Heat taken care of bolts for higher strength
Corrosion resistant bolts and nuts for ease of maintenance
Accommodates parallel and angular misalignment
Removal of center assembly permits forease of maintenance with out repositioning machinery
Rigid hubs outboard permits for greater shaft diameters
Developed for high-torque low-speed applications that occur in mill operations
Ordering Details
Application: Driver and Driven.
Kind and size of coupling, horizontal, vertical etc.
Electrical power: Motor horspower or torque requirement.
Velocity: Motor RPM or Driven RPM.
Distance involving shaft ends (BSE).
Connecting gear shaft sizes.
Specify which hubs are to be utilised within the gear (Rigid or Flex).
Rigid hubs is going to be applied within the gear unless otherwise specified.
Length of floating shaft may influence max angular misalignment.