DC MOTOR PUMP GROUP 1
Basic Description
Consisting of the heavy duty DC motor as well as the CB1S gear pump, this pump motor group is surely an excellent hydraulic power unit for mobile hydraulic equipments, such as motor vehicle carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP 2
General Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
General Description
This motor pump consists of a 4.5″ DC motor in addition to a CBSR gear pump that has a standard electrical power up/gravity down circuit having a relief valve, a check valve in addition to a solenoid release valve.
Specific Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned just before mounting the power unit.
3. Viscosity in the hydraulic oil shoud be 15~68 cst, which need to also be clean and absolutely free of impurities. N46 hydraulic oil is encouraged.
four. The power unit needs to be mounted horizontally.
5. The relief valve strain is preset about 25% larger compared to the operating stress.
six. Flow management valve for lowing speed adjustment is accessible unpon request.