For Use at Low-temperature
When applying conveyor chains at low-temperature this kind of as within a fridge or within a cold environment, the next conditions could arise.
one) Reduced temperature brittleness
On the whole, a material is embrittled at low-temperature and shock resistance is lowered. This phenomenon is called low-temperature brittleness, plus the degree of embrittlement differs from material to materials.
The services limit of the conveyor chain is dependent upon its specs.
two)Influence of freezing
At low-temperature, bending failure, roller rotation failure, repairing of chain, and so forth. could be induced by the freezing of penetrated water or deposited frost in the clearance between pins and bushings, bushings and rollers or inner plates and outer plates. These circumstances lead to an overload to act over the chain and drive, diminishing the life of the chain.
To prevent freezing, on the whole, it truly is recommended to fill the clearances with a low-temperature lubricant ideal to the service temperature to stop water, frost, etc. from penetrating the respective portions with the chain. For lubrication, a silicon based grease is recommended.
For Use at High-temperature
Chains power is diminished by high-temperature atmosphere, direct conveying of high-temperature loads, or radiated heat, and so on. The services restrict at high-temperature depends not within the temperature on the services natural environment however the temperature and material of your chain physique.
Following problems may possibly happen when chains are made use of at high-temperature:
one) High temperature brittleness and fracture by lowered hardness of heat treated materials
two) Brittleness brought on by carbide 
precipitation
3) Abnormal dress in by scale
4) Fatigue fracture triggered by repeated thermal shock (cooling and growth)
5) Abnormal wear as a result of an increase inside the coefficient of friction
6) Creep fracture
7) Fracture resulting from thermal fatigue of welded region
eight) Effects caused by thermal growth
?Stiff hyperlinks and rotation failure as a consequence of decreased clearance ?Fatigue fracture as a result of lowered fitting force
9）Lubrication failure and stiff links because of deterioration and carbonization of lubricating oil
Grease outstanding in heat resistance consist of individuals dependant on silicon, graphite or molybdenum disulfide.
For use at high-temperature, high-temperature resistance bearings and stainless steel bearings are recommended.
