Basic Description
This energy unit functions a everlasting magnet motor that has a electrical power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing motion is activated by the solenoid valve with all the lowering speed controlled from the stress compensated movement control valve. Goods of this series could be extensively utilized in the industry of logistic gadgets this kind of as fork lift, mini lift table, etc.
Particular Notes
1. This power unit is of S3 duty cycle, i.e.,non-continuous operation, thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned before set up of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities. N46 hydraulic oil is proposed.
four. This power unit is built to be mounted vertically.
5. Check the oil degree inside the tank following the 1st star of your power unit.
six. Oil transforming is required right after the original 100 operation hrs,afterwards when every 3000 hours.
7. More pump sizes and tank sizes are avaiable on request.