Make use of a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power tranny applications. Flanged quick-disconnect bushings feature a completely split design to help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing in to the shaft, while a split taper includes a flange and an Taper Bore Bushing integral on the bushing to help provide more drive.
L – Space required to tighten bushing or loosen to remove hub with puller using brief hex key.
M – Space necessary to remove bushing using screws as jackscrews – short hex key – no puller reuired.
Listed required hub diameter is for reference just. Severe conditions may necessitate larger hub and in some instances a slightly smaller hub could be satisfactory. Inquire about particular application.
We can also supply unique bushings manufactured from other machinable components. Please inquire
External key of all sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in in ., metric, and spline bores. Bore range between 3/8″ to 10″
Gates Taper-Lock bushings are used to mount pulleys, sprockets and sheaves on shafts. The durable stainless construction is perfect for food and beverage applications or where noncorrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that want synchronous rotation. The carbon steel bushing provides strength and resistance to use and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) can be found in a number of outside diameters to fit this Taper-Lock bushing, permitting the precise selection of the number of drive tooth or grooves. This bushing is suitable for use in an array of mechanical and electronic adjustable drives, including auto and printing industries.

Ordinary bearings provide low-friction sliding contact for relative motion between parts of a machine. They will be the simplest type of bearing, without rolling elements, and there are three simple types of plain bearings: radial simple bearings (also called sleeve bearings or bushings) to aid rotating or reciprocating shafts, thrust bearings (also called washers) to aid axial loads on shafts, and linear bearings to support and guide the movement of parts in a directly range. Flanged sleeve bearings possess a flange on one end to aid axial loads. Spherical basic bearings are radial bearings that enable angular misalignment of the shaft. Ordinary bearings are manufactured from durable, low-friction materials such as for example sintered or cast bronze alloys, plastic-type material, or a combination of a metallic shell and a plastic-type material bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing materials. Plain bearings are found in automobiles, building and mining products, textile manufacturing products, and robotics, amongst others.
The maximum bore is supplied with a standard ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing mounting screws could be either inch (UNC) or metric (BSW) and care should be taken to choose the proper hub part quantity.
Taper Lock Busings are a product of Baldor Dodge and so are not included with Lovejoy coupling hubs.
Optimum bores size and torque capacities are per Dodge specifications and Lovejoy isn’t accountable for the accuracy of any of the values listed in accordance with bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are accustomed to attach sprockets, pulleys, and couplings onto shafts. They possess a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be manufactured in bushing to allow it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is more convenient to directly bore than to drill, tap and taper bore hubs to support bushings. The adapter is a gray iron, taper-bored sleeve whichfits in to the straight bore of a hub. The bushing basically fits inside the adapter which is definitely tapped for the bushing screws. When tightening the locking screws, adapter can be extended against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an considerable range of energy absorbing elastomeric isolators that limit the transmitting of structure-borne vibration and impacts. Our items are designed for simple make use of and a multitude of orientations in compression, shear and slanted angle loading. While economical, these products are made of quality rubber, silicone, Neoprene and steel components that enable support for the proper amount of load for each program. Filter through our in-depth product listing of elastomeric products including bottom mounts, cup mounts, bumpers, bushings and grommets to get the right alternative for your application.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and many other power transmission applications. Flanged quick-disconnect bushings include a completely split style to greatly help provide easy set up and disassembly. A tapered bushing with directly edges uses an interior screw to help drive the bushing in to the shaft, while a split taper has a flange and an integral on the bushing to help provide more drive.
L – Space necessary to tighten bushing or loosen to eliminate hub with puller using brief hex key.
M – Space necessary to remove bushing using screws as jackscrews – short hex key – no puller reuired.
Listed necessary hub diameter is usually for reference just. Severe conditions may necessitate bigger hub and in some cases a slightly smaller sized hub could be satisfactory. Inquire about particular application.
We can also supply particular bushings manufactured from other machinable components. Please inquire
External key on most sizes for positive drive and better torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in in ., metric, and spline bores. Bore range between 3/8″ to 10″
Gates Taper-Lock bushings are used to install pulleys, sprockets and sheaves on shafts. The durable stainless construction is ideal for meals and beverage applications or where noncorrosive sprockets are had a need to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that want synchronous rotation. The carbon steel bushing provides power and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not included) can be found in a number of outside diameters to match this Taper-Lock bushing, allowing the precise selection of the amount of drive the teeth or grooves. This bushing can be suitable for use in a wide variety of mechanical and digital adjustable drives, including automotive and printing industries.