Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque result is required. Great for student based projects which includes robots and buggies.
The unit has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The motor is snap installed into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal candidates for the DRV8833 motor driver carrier. Motor overheating can be due to excessive stalling, even at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply watch your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not particularly designed to work with this kind of shaft (the hub’s set screw could damage the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new standards for reliability, performance and economy with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style provides for easy integration right now and a truly future proof solution. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The engine terminal box can be mounted in alternate positions rotated in 90º steps around the engine frame providing for unparalleled integration options.
Ever-Power gear motors adhere to North American and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total answer for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty environments without the utilization of additional enclosures. Full rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a corner turn, optional dual output, or an inability for the motor to be back again driven. The DC right angle gear motors are made for continuous and intermittent duty operation. Our right angle equipment reducers are designed with a number of mounting plate choices, making them perfect for a number of DC engine based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are designed to worm motor generate high torque in a little package size. Worm Equipment Motors are excellent for applications that require a personal- locking or breaking feature since the output shaft can’t rotate when there’s no power used. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental Chair / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Products will continue to work with you to design and manufacture a Worm Gear Electric motor that may optimize the efficiency of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for strength and a high torque output. Due to the special mechanical framework of the worm drive the motor output shaft is certainly self locking and can not be rotated.
This part runs on the two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and will attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their strength in applications where high equipment ratios are essential. Our worm geared motors are for that reason optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions allow simple and efficient cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical substance, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that want drive systems, and each of these has its own unique requirements. The EP series worm equipment motors could be quickly and efficiently adapted to satisfy your needs.
Worm gear systems impress with their high power density and compact design. If required, we are able to also supply them with the impressive nsd tupH surface treatment.
In addition to the basic EP casing, we offer an extensive line of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These could be very easily field set up, but we will also be happy to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Even and Clean: The EP worm gear unit SMI
SMI worm gear systems feature a easy, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface conversion makes this product ideally suited for severe and demanding industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have on all sides different fixing possibilities and enable a simple assembling for the customer.
Other drive configurationscan be created by use of built-on components (e.g. torque arm and result flanges). The housings are made in light weight structure out of aluminium die cast. Electric motor attachment is realised in general by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Purchase Worm Drive Gearbox with Motor – incorporating the next features: 1 to 6V voltage rating, 17100 rpm simply no load rate, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 engine (included), most suitable for applications where a simple to fit, high torque output is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where a simple to fit, high torque output is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that’s, in the case of motor without electric, the output axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole engine output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential in order to avoid your robot being pushed by your opponent robot. The worm equipment is certainly a better option compared to the spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary gear trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the greater friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm can be used. This can be an advantage when it’s desired to eliminate any likelihood of the output driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
